Steps to Change the
Displayed Maps on the Garmin GPS Screen | GARMIN SUPPORT NUMBER:
+1-844-313-6006
There are so many maps available on your Garmin GPS receiver, you probably turn off few of them and in order to hide or show different maps. The process of changing the displayed maps is not as easy as it appears. So, in this article, we provide you with some of the best available instructions to Change the Displayed Map on the Garmin GPS Screen.
Changing the displayed Maps on the Oregon, Colorado and Dakota series.
This article will guide you how to hide or show displayed Maps on Oregon, Colorado and Dakota GPS units. Instructions could slightly vary per the profile and unit you’re using.
There are so many maps available on your Garmin GPS receiver, you probably turn off few of them and in order to hide or show different maps. The process of changing the displayed maps is not as easy as it appears. So, in this article, we provide you with some of the best available instructions to Change the Displayed Map on the Garmin GPS Screen.
Changing the displayed Maps on the Oregon, Colorado and Dakota series.
This article will guide you how to hide or show displayed Maps on Oregon, Colorado and Dakota GPS units. Instructions could slightly vary per the profile and unit you’re using.
Follow the instruction mentioned below:
Click on the Setup button from the screen of the main menu
Click on “Map”
Click on the option “Map Information Select Map”
Click on each Map to show or hide the Map
This method is easy for Dakota Series, you just have to click on Enable or disable and it’ll turn to blue.
Repeat the method for any Map until you get it configured according to your requirements.
Steps to Change the Displayed Maps on the Garmin GPS Screen
Changing Maps Displayed on the eTrex Series, 76C(S)x and GPSMap 60C(S)x
This phase can assist you to change maps on eTrex Series, 76C(S)x and GPSMap 60C(S)x and units the same as them. The method is not that easy as it was for the Oregon Dakota or theColorado series.
Follow the steps mentioned below:
Tap the “Page” button till you’re viewing the Map.
Click the “Menu” button and then scroll to the “Setup Map” button.
Press “Enter”
Scroll left/right till you find the “I” (Map setup Information). You can enable disable single segments of the map by helping this page, however, this is not suggested.
Press “Menu”
Here, you'll scroll to any choice and tap “Enter”.
Now you can select show none or show all from the screen. You have to press “Enter” once it displays Hide [Map Name]” it will automatically hide your map and I'll turn to “Show [Map Name]”.
Hide/ show Map until you get it configured per your needs.
Then select “Quit” choice to return to the map.
Changing Displayed Maps on the Nuvi Unit
These maps are normally shown on hand-held units and can be installed and turned OFF and ON by putting Nuvi Automobile.
Follow the steps mentioned below:
Click on the “Tools” icon from the screen of the main menu
Click “Settings”
Scroll down and you will find the “Map” option and then click on it.
Press “Map Info”
Uncheck the maps wish to cover and click on the maps those you wish to display.
Tap back 2 or 3 times to go back to the main menu.
If you can't able to do these steps at your own then call us on GARMIN SUPPORT NUMBER: +1-844-313-6006.
Click on “Map”
Click on the option “Map Information Select Map”
Click on each Map to show or hide the Map
This method is easy for Dakota Series, you just have to click on Enable or disable and it’ll turn to blue.
Repeat the method for any Map until you get it configured according to your requirements.
Steps to Change the Displayed Maps on the Garmin GPS Screen
Changing Maps Displayed on the eTrex Series, 76C(S)x and GPSMap 60C(S)x
This phase can assist you to change maps on eTrex Series, 76C(S)x and GPSMap 60C(S)x and units the same as them. The method is not that easy as it was for the Oregon Dakota or theColorado series.
Follow the steps mentioned below:
Tap the “Page” button till you’re viewing the Map.
Click the “Menu” button and then scroll to the “Setup Map” button.
Press “Enter”
Scroll left/right till you find the “I” (Map setup Information). You can enable disable single segments of the map by helping this page, however, this is not suggested.
Press “Menu”
Here, you'll scroll to any choice and tap “Enter”.
Now you can select show none or show all from the screen. You have to press “Enter” once it displays Hide [Map Name]” it will automatically hide your map and I'll turn to “Show [Map Name]”.
Hide/ show Map until you get it configured per your needs.
Then select “Quit” choice to return to the map.
Changing Displayed Maps on the Nuvi Unit
These maps are normally shown on hand-held units and can be installed and turned OFF and ON by putting Nuvi Automobile.
Follow the steps mentioned below:
Click on the “Tools” icon from the screen of the main menu
Click “Settings”
Scroll down and you will find the “Map” option and then click on it.
Press “Map Info”
Uncheck the maps wish to cover and click on the maps those you wish to display.
Tap back 2 or 3 times to go back to the main menu.
If you can't able to do these steps at your own then call us on GARMIN SUPPORT NUMBER: +1-844-313-6006.
No comments:
Post a Comment